NAME

xl-disk-configuration - XL Disk Configuration Syntax

SYNTAX

This document specifies the xl config file format disk configuration option. It has the following form:

   disk = [ 'DISKSPEC', 'DISKSPEC', ... ]

where each DISKSPEC is in this form:

   [<key>=<value>|<flag>,]*,
     [<target>, [<format>, [<vdev>, [<access>]]]],
     [<key>=<value>|<flag>,]*
     [target=<target>]

For example, these strings are equivalent:

    /dev/vg/guest-volume,,hda
    /dev/vg/guest-volume,raw,hda,rw
    format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume
    raw:/dev/vg/guest-volume,hda,w  (deprecated, see below)

As are these:

    /root/image.iso,,hdc,cdrom
    /root/image.iso,,hdc,,cdrom
    /root/image.iso,raw,hdc,devtype=cdrom
    format=raw, vdev=hdc, access=ro, devtype=cdrom, target=/root/image.iso
    raw:/root/image.iso,hdc:cdrom,ro   (deprecated, see below)

These might be specified in the domain config file like this:

    disk = [ '/dev/vg/guest-volume,,hda', '/root/image.iso,,hdc,cdrom' ]

More formally, the string is a series of comma-separated keyword/value pairs, flags and positional parameters. Parameters which are not bare keywords and which do not contain "=" symbols are assigned to the so-far-unspecified positional parameters, in the order below. The positional parameters may also be specified explicitly by name.

Each parameter may be specified at most once, either as a positional parameter or a named parameter. Default values apply if the parameter is not specified, or if it is specified with an empty value (whether positionally or explicitly).

Whitespace may appear before each parameter and will be ignored.

Positional Parameters

target
Description

Block device or image file path. When this is used as a path, /dev will be prepended if the path doesn't start with a '/'.

Supported values

N/A

Deprecated values

N/A

Default value

None. While a path is provided in most cases there is an exception: for a cdrom device, lack of this attribute would imply an empty cdrom drive.

Special syntax

When this parameter is specified by name, ie with the target= syntax in the configuration file, it consumes the whole rest of the DISKSPEC including trailing whitespaces. Therefore in that case it must come last. This is permissible even if an empty value for the target was already specified as a positional parameter. This is the only way to specify a target string containing metacharacters such as commas and (in some cases) colons, which would otherwise be misinterpreted.

Future parameter and flag names will start with an ascii letter and contain only ascii alphanumerics, hyphens and underscores, and will not be legal as vdevs. Targets which might match that syntax should not be specified as positional parameters.

format
Description

Specifies the format of image file.

Supported values

raw, qcow, qcow2, vhd, qed

Deprecated values

None

Default value

raw

vdev
Description

Virtual device as seen by the guest (also referred to as guest drive designation in some specifications). xen-vbd-interface(7)

Supported values

hd[x], xvd[x], sd[x] etc. Please refer to the above specification for further details.

Deprecated values

None

Default Value

None, this parameter is mandatory.

access
Description

Specified access control information. Whether or not the block device is provided to the guest in read-only or read-write mode depends on this attribute.

Supported values

ro, r (specifies read-only)

rw, w (specifies read/write)

Deprecated values

None

Default value

rw unless devtype=cdrom, in which case r

Other Parameters And Flags

devtype=DEVTYPE
Description

Qualifies virtual device type.

Supported values

cdrom

Deprecated values

None

Mandatory

No

cdrom

Convenience alias for "devtype=cdrom".

backend=DOMAIN-NAME
Description

Designates a backend domain for the device

Supported values

Valid domain names

Mandatory

No

Specifies the backend domain which this device should attach to. This defaults to domain 0. Specifying another domain requires setting up a driver domain which is outside the scope of this document.

backendtype=TYPE
Description

Specifies the backend implementation to use

Supported values

phy, tap, qdisk

Mandatory

No

Default value

Automatically determine which backend to use.

This does not affect the guest's view of the device. It controls which software implementation of the Xen backend driver is used.

Not all backend drivers support all combinations of other options. For example, "phy" does not support formats other than "raw". Normally this option should not be specified, in which case libxl will automatically determine the most suitable backend.

script=SCRIPT

Specifies that target is not a normal host path, but rather information to be interpreted by the executable program SCRIPT, (looked for in /etc/xen/scripts, if it doesn't contain a slash).

These scripts are normally called "block-SCRIPT".

direct-io-safe
Description

Disables non-O_DIRECT workaround

Supported values

absent, present

Mandatory

No

Default value

absent (workaround may be enabled)

There is a memory lifetime bug in some driver domain (dom0) kernels which can cause crashes when using O_DIRECT. The bug occurs due to a mismatch between the backend-visible lifetime of pages used for the Xen PV network protocol and that expected by the backend kernel's networking subsystem. This can cause crashes when using certain backends with certain underlying storage.

See: http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html

For this reason, (this version of) the Xen libxl toolstack disables O_DIRECT when using the qemu-based Xen PV backend (qdisk).

However, this workaround has performance and scaling implications, and it is only necessary if the underlying device is a network filesystem. If the underlying device is not, then it is good to disable it; that is what this option is for.

This option simply requests that the workaround be disabled. (However, not all backends versions which use the workaround understand this option, so this is on a best effort basis.)

It's important to note that if you are storing the VM disk on a network filesystem or a network block device (NFS or ISCSI) it might not be safe to use this option. Otherwise specifying it is safe and can give better performances.

If in the future the bug is fixed properly this option will then be silently ignored.

discard / no-discard
Description

Request that backend advertise discard support to frontend

Supported values

discard, no-discard

Mandatory

No

Default value

discard

An advisory setting for the backend driver, specifying whether to advertise discard support (TRIM, UNMAP) to the frontend. The real benefit of this option is to be able to force it off rather than on. It can be used to disable "hole punching" for file based backends which were intentionally created non-sparse to avoid fragmentation of the file.

COLO Parameters

colo

Enable COLO HA for disk. For better understanding block replication on QEMU, please refer to: http://wiki.qemu.org/Features/BlockReplication Note that the COLO configuration settings should be considered unstable. They may change incompatibly in future versions of Xen.

colo-host
Description

Secondary host's address

Mandatory

Yes when COLO enabled

colo-port
Description

Secondary port. We will run a nbd server on secondary host, and the nbd server will listen this port.

Mandatory

Yes when COLO enabled

colo-export
Description

We will run a nbd server on secondary host, exportname is the nbd server's disk export name.

Mandatory

Yes when COLO enabled

active-disk
Description

This is used by secondary. Secondary guest's write will be buffered in this disk.

Mandatory

Yes when COLO enabled

hidden-disk
Description

This is used by secondary. It buffers the original content that is modified by the primary VM.

Mandatory

Yes when COLO enabled

Deprecated Parameters, Prefixes And Syntaxes

Deprecated forms are acceptable and are intended work compatibly with xend and xl from xen 4.1. In future they may print a warning. Support for deprecated parameters and syntaxes are likely to be dropped in future versions of xl.

There is support for a deprecated old syntax for DISKSPEC:

  [<format>:][<target>],<vdev>[:<devtype>],<access>   (deprecated)

This syntax also supports deprecated prefixes, described below. These are found prepended to the format parameter - eg tap:aio:qcow:.

format
Description

Specifies the format (deprecated)

Supported values

raw: qcow2: vhd:

In xend and old versions of libxl it was necessary to specify the format with a prefix. For compatibility, these three prefixes are recognised as specifying the corresponding format. They are equivalent to format=FORMAT or the specification of format (without a colon) as a positional parameter.

script
Description

Specifies the script (deprecated)

Supported values

iscsi: nbd: enbd: drbd:

In xend and old versions of libxl it was necessary to specify the "script" (see above) with a prefix. For compatibility, these four prefixes are recognised as specifying the corresponding script. They are equivalent to script=block-SCRIPT.

deprecated-prefix
Description

Deprecated prefix, ignored

Supported values

tapdisk: tap2: aio: ioemu: file: phy:

Various prefixes were required by xend and older versions of libxl to make the block devices work. In some cases these options would override the backend type, but in other cases they would be ignored in favour of "making it work"; in yet other cases it would be necessary to specify several of these, for example:

  tap:aio:/some/path...

All of these prefixes are now stripped and ignored.

Missing format and empty target

The following syntax is also supported:

  ,<vdev>:<devtype>,<access>   (deprecated)

This is solely for compatibility with xend's syntax for empty cdroms, which is (for example) ,hdc:cdrom,r.