-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

            Xen Security Advisory CVE-2018-10982 / XSA-261
                              version 3

                 x86 vHPET interrupt injection errors

UPDATES IN VERSION 3
====================

CVE assigned.

ISSUE DESCRIPTION
=================

The High Precision Event Timer (HPET) can be configured to deliver
interrupts in one of three different modes - through legacy interrupts;
through the IO-APIC; or optionally via a method similar to PCI MSI.  The
last mode is optional and not implemented by Xen.  However, of the first
two modes, only the legacy variant was properly implemented.

If a guest set up an HPET timer in IO-APIC mode, Xen would still
handle this using the code for the legacy mode.  Unfortunately, the
available IO-APIC mode interrupt numbers are higher than legacy mode
interrupts.  The result was array overruns.

IMPACT
======

A malicious or buggy HVM guest may cause a hypervisor crash, resulting
in a Denial of Service (DoS) affecting the entire host.  Privilege
escalation, or information leaks, cannot be excluded.

VULNERABLE SYSTEMS
==================

Xen versions 3.4 and later are vulnerable.

Only x86 systems are vulnerable.  ARM systems are not vulnerable.

Only x86 HVM guests can exploit the vulnerability.  x86 PV and PVH
guests cannot exploit the vulnerability.

Only x86 HVM guests provided with hypervisor-side HPET emulation can
exploit the vulnerability.  That is the default configuration.  x86
HVM guests whose configuration explicitly disables this emulation (via
"hpet=0") cannot exploit the vulnerability.

MITIGATION
==========

Running only PV or PVH guests avoids the vulnerability.

Not exposing the hypervisor based HPET emulation to HVM guests, by
adding "hpet=0" to the guest configuration, also avoids the
vulnerability.

CREDITS
=======

This issue was discovered by Roger Pau Monné of Citrix.

RESOLUTION
==========

Applying the appropriate attached patch resolves this issue.

xsa261.patch           xen-unstable, Xen 4.10.x
xsa261-4.9.patch       Xen 4.9.x
xsa261-4.8.patch       Xen 4.8.x
xsa261-4.7.patch       Xen 4.7.x, Xen 4.6.x

$ sha256sum xsa261*
7b7bbf0fb497491911816e522902f72d3b41355ba71455ab82ebf980160d1a1f  xsa261.meta
175501977204db84d08a6fd81d9fd4b69f97f70cbf6f65e6ce0abfeab03eae95  xsa261.patch
98fb28bac871aae7c2f897a5506a2b03f340bf122a3a7f65aa65f3b3c9a525b4  xsa261-4.7.patch
503f1476813e6572dc37b5a0df65b5390567230d9cc006752bf72bf57bbd754d  xsa261-4.8.patch
f1aac841327d3b5b1e2007b4ebe56223de488e1eb2fa636653725d7d7cd5f82a  xsa261-4.9.patch
$

DEPLOYMENT DURING EMBARGO
=========================

Deployment of the patches described above (or others which are
substantially similar) and the PV/PVH guest mitigation are permitted
during the embargo, even on public-facing systems with untrusted guest
users and administrators.

HOWEVER deployment of the "hpet=0" guest config mitigation described
above is NOT permitted (except where all the affected systems and VMs
are administered and used only by organisations which are members of
the Xen Project Security Issues Predisclosure List).  Specifically,
deployment on public cloud systems is NOT permitted.

This is because in that case the configuration change is visible to the
guest, which could lead to the rediscovery of the vulnerability.

But: Distribution of updated software is prohibited (except to other
members of the predisclosure list).

Predisclosure list members who wish to deploy significantly different
patches and/or mitigations, please contact the Xen Project Security
Team.

(Note: this during-embargo deployment notice is retained in
post-embargo publicly released Xen Project advisories, even though it
is then no longer applicable.  This is to enable the community to have
oversight of the Xen Project Security Team's decisionmaking.)

For more information about permissible uses of embargoed information,
consult the Xen Project community's agreed Security Policy:
  http://www.xenproject.org/security-policy.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBCAAGBQJa9Wy1AAoJEIP+FMlX6CvZaxkIALwHLRw4JlORTplsS9bwnioh
kuNausNp1pU9IqfcUKEI17n5+HekiXfLNennHEWYgYfdpNlWAbjUW5GaczII0KmS
IJa8UvptnYydhg73Q8WWlYOx3i8nS15+ioIH8RIa1Vtvv0p7vbHf8C9BmjmYf1oa
5WH9Ut4Sx5wwALuCh/gO71ja5vgAAIpgQTf5R4KL0x9sJiCLTw2A4yxVmVd24bES
1fNoH3/qdbjgMjl7sLPCdsXLOqg9Xi77i5f5XnJMZgWQRQyh0XLeo5itiDIuMF/k
tEMuEpKQ5+t4GNg92B67dFVWxeX1VIRrQ9a18WfXcwttM3xLFNcqt3BpSV9K8Tg=
=KeNf
-----END PGP SIGNATURE-----